LC4064ZC-75M56I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 56 |
| JESD-30 Code | S-PBGA-B56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 32 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.35mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064ZC-75M56I Overview
64macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.There is a 56-LFBGA, CSPBGA package containing it.There are 32 I/Os on the board.Terminations of devices are set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.Power is provided by a supply voltage of 1.8V volts.There is a part in the family [0].It is recommended to package the chip by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Ensure that the chip is mounted by Surface Mount.In FPGA terms, it is a type of ispMACH? 4000Zseries FPGA.Chips are programmed with 56 pins.It is also characterized by YES.The LC4064can be used to identify its related parts.High efficiency requires a voltage supply of [0].For storing data, it is recommended to use [0].This electronic part is mounted in the way of Surface Mount.In this case, the maximum supply voltage is 1.9V.Despite its minimal supply voltage of [0], it is capable of operating.There are 484 Programmable I/Os.It is recommended that the maximal frequency be lower than 250MHz.There are 12 dedicated inputs used to detect the status of input signals.Basic building blocks have 4logic elements.
LC4064ZC-75M56I Features
56-LFBGA, CSPBGA package
32 I/Os
The operating temperature of -40°C~105°C TJ
56 pin count
LC4064ZC-75M56I Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-75M56I CPLDs applications.
- Software Configuration of Add-In Boards
- Power Meter SMPS
- Digital systems
- Power automation
- Parity generators
- Handheld digital devices
- Boolean function generators
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Multiple DIP Switch Replacement
- D/T registers and latches
