LC4064ZC-75MN56I
| Parameters | |
|---|---|
| Number of Pins | 56 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 56 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 32 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.35mm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
LC4064ZC-75MN56I Overview
64macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The item is packaged with 56-LFBGA, CSPBGA.The device is programmed with 32 I/Os.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.Power is supplied by a voltage of 1.8V volts.It is included in Programmable Logic Devices.Trayshould be used for packaging the chip.To ensure reliability, the device operates at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.The ispMACH? 4000Zseries comprises this type of FPGA.The chip is programmed with 56 pins.This device can also display [0].The LC4064indicates that related parts can be found.High efficiency requires the supply voltage to be maintained at [0].For storing data, it is recommended to use [0].This device is mounted by Surface Mount.56pins are included in its design.A voltage of 1.9V is the maximum supply voltage for this device.A minimum supply voltage of 1.7V is required for this device to operate.There are a total of 4 logic elements or blocks.In total, there are 484programmable I/Os.This frequency is 178.57MHz.A total of 12dedicated inputs are available for detecting the status of input signals.An elementary building block consists of 36logic elements/cells.
LC4064ZC-75MN56I Features
56-LFBGA, CSPBGA package
32 I/Os
The operating temperature of -40°C~105°C TJ
56 pin count
56 pins
LC4064ZC-75MN56I Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-75MN56I CPLDs applications.
- Programmable polarity
- Power up sequencing
- Field programmable gate
- Digital multiplexers
- Dedicated input registers
- ROM patching
- LED Lighting systems
- ON-CHIP OSCILLATOR CIRCUIT
- Software-driven hardware configuration
- Wide Vin Industrial low power SMPS
