LC4064ZC-75T100E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 80μA |
| Number of I/O | 64 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064ZC-75T100E Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The item is enclosed in a 100-LQFP package.The device is programmed with 64 I/O ports.Devices are programmed with terminations of [0].The terminal position of this electrical component is QUAD.The power supply voltage is 1.8V.There is a part included in Programmable Logic Devices.Package the chip by Tray.Due to its reliability, it is operated at a temperature of [0].It is recommended to mount the chip by Surface Mount.FPGAs belonging to the ispMACH? 4000Zseries contain this type of chip.Chips are programmed with 100 pins.It is also characterized by YES.In accordance with the [0], its related parts are listed.If high efficiency is desired, the supply voltage should be kept at [0].In order to store data, EEPROMis used.In this case, it is mounted by Surface Mount.The device is designed with pins [0].With a maximum supply voltage of [0], it operates.With a minimal supply voltage of [0], it operates.In total, there are 484programmable I/Os.There should be a lower maximum frequency than 250MHz.A total of 10dedicated inputs are available for detecting the status of input signals.The fundamental building block consists of 4logic elements/cells.
LC4064ZC-75T100E Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~130°C TJ
100 pin count
100 pins
LC4064ZC-75T100E Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-75T100E CPLDs applications.
- Random logic replacement
- Protection relays
- Digital systems
- D/T registers and latches
- Dedicated input registers
- Software-Driven Hardware Configuration
- Handheld digital devices
- INTERRUPT SYSTEM
- Reset swapping
- Pattern recognition
