LC4064ZC-75T100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 64 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064ZC-75T100I Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.100-LQFPis the package in which it resides.As you can see, this device has 64 I/O ports programmed into it.There is a 100terminations set on devices.There is a QUADterminal position on the electrical part in question.The power source is powered by 1.8Vvolts.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000Z series.Chips are programmed with 100 pins.This device also displays [0].The LC4064contains its related parts.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].A Surface Mountis mounted on this electronic component.There are 100 pins embedded in the device.It operates with the maximal supply voltage of 1.9V.The minimal supply voltage is 1.7V.A total of 4logic elements/blocks are present.A total of 484programmable I/Os are available.A frequency of 178.57MHzcan be achieved.There are 10 dedicated inputs used to detect the status of input signals.As a fundamental building block, there are 36 logic elements/cells.
LC4064ZC-75T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4064ZC-75T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-75T100I CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Voltage level translation
- PLC analog input modules
- D/T registers and latches
- State machine control
- PULSE WIDTH MODULATION (PWM)
- Power automation
- Page register
- Custom shift registers
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
