LC4064ZC-75TN100C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064ZC-75TN100C Overview
64 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is part of the 100-LQFP package.As a result, it has 64 I/O ports programmed.It is programmed to terminate devices at [0].Its terminal position is QUAD.A voltage of 1.8Vprovides power to the device.The part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].It is recommended that Surface Mountholds the chip in place.It is a type of FPGA belonging to the ispMACH? 4000Z series.With 100pins programmed, the chip is ready to use.It is also characterized by YES.The LC4064can be used to identify its related parts.The supply voltage should be maintained at 1.8V for high efficiency.It is recommended to store data in [0].In this case, it is mounted by Surface Mount.The pins are [0].It operates at a maximum supply voltage of 1.9V volts.The device is designed to operate with a minimal supply voltage of 1.7VV.A total of 4logic elements/blocks are present.There can be 178.57MHz frequency achieved.The program consists of 36 logic blocks (LABs).The status of input signals is determined by 10dedicated inputs.
LC4064ZC-75TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
36 logic blocks (LABs)
LC4064ZC-75TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-75TN100C CPLDs applications.
- I2C BUS INTERFACE
- Code converters
- Page register
- Preset swapping
- USB Bus
- Address decoding
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Digital designs
- Power Meter SMPS
- D/T registers and latches
