LC4064ZC-75TN100E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 80μA |
| Number of I/O | 64 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064ZC-75TN100E Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is contained in package [0].The device is programmed with 64 I/Os.It is programmed that device terminations will be 100 .Its terminal position is QUAD.Power is provided by a supply voltage of 1.8V volts.This part is part of the family [0].As a result, it is packaged as Tray.Due to its reliability, it is operated at a temperature of [0].Surface Mountshould be used for mounting the chip.The ispMACH? 4000Zseries comprises this type of FPGA.There are 100pins on the chip.It is also characterized by YES.The LC4064can be used to identify its related parts.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].It is mounted by Surface Mount.There are 100pins on it.A maximum supply voltage of 1.9Vis used in its operation.In order for it to operate, a supply voltage of 1.6Vis required.There are 4 logic elements or blocks present.There are a total of 484 Programmable I/Os.The maximal frequency should be lower than 250MHz.A total of 10dedicated inputs are available for the purpose of detecting input signals.
LC4064ZC-75TN100E Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~130°C TJ
100 pin count
100 pins
LC4064ZC-75TN100E Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-75TN100E CPLDs applications.
- Software-Driven Hardware Configuration
- Preset swapping
- Address decoders
- Programmable polarity
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Digital designs
- Handheld digital devices
- Parity generators
- Boolean function generators
- Timing control
