LC4064ZE-5MN144C
| Parameters | |
|---|---|
| Max Frequency | 241MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 5.8ns |
| Height Seated (Max) | 1.1mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-TFBGA, CSPBGA |
| Number of Pins | 144 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000ZE |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | LC4064 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 64 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 5.8 ns |
| Number of Logic Elements/Cells | 4 |
LC4064ZE-5MN144C Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is part of the 144-TFBGA, CSPBGA package.The device is programmed with 64 I/O ports.There are 144 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered from a supply voltage of 1.8V.It belongs to the family [0].Ideally, the chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Chips should be mounted by Surface Mount.In FPGA terms, it is a type of ispMACH? 4000ZEseries FPGA.With 144pins programmed, the chip is ready to use.It is also characterized by YES.According to the LC4064, its related parts can be found.High efficiency requires the supply voltage to be maintained at [0].It is recommended that data be stored in [0].Surface Mountis used to mount this electronic component.144pins are included in its design.With a maximum supply voltage of [0], it operates.With a minimal supply voltage of [0], it operates.It should be below 241MHzat the maximal frequency.The input signals are detected by 10dedicated inputs.Basic building blocks have 4logic elements.
LC4064ZE-5MN144C Features
144-TFBGA, CSPBGA package
64 I/Os
The operating temperature of 0°C~90°C TJ
144 pin count
144 pins
LC4064ZE-5MN144C Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZE-5MN144C CPLDs applications.
- Portable digital devices
- Boolean function generators
- Address decoding
- ROM patching
- State machine design
- Bootloaders for FPGAs
- Programmable power management
- INTERRUPT SYSTEM
- TIMERS/COUNTERS
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
