LC4064ZE-5TN48I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000ZE |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 277.78MHz |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 32 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 5.8 ns |
| Number of Logic Elements/Cells | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064ZE-5TN48I Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The product is contained in a 48-LQFP package.It is programmed with 32 I/Os.There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part is wired with a terminal position of QUAD.The power source is powered by 1.8Vvolts.It is a part of the family [0].It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at [0].It is recommended to mount the chip by Surface Mount.The ispMACH? 4000ZEseries comprises this type of FPGA.In this chip, the 48pins are programmed.When using this device, YEScan also be found.The LC4064shows its related parts.In order to achieve high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].A Surface Mountis mounted on this electronic component.This board has 48 pins.With a maximum supply voltage of [0], it operates.In order for it to operate, a supply voltage of 1.7Vis required.In this case, 277.78MHzis the frequency that can be achieved.To detect the status of input signals, there are 4dedicated inputs.There are 4 logic elements/cells on the device.
LC4064ZE-5TN48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4064ZE-5TN48I Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZE-5TN48I CPLDs applications.
- Preset swapping
- INTERRUPT SYSTEM
- Dedicated input registers
- Storage Cards and Storage Racks
- ROM patching
- Handheld digital devices
- D/T registers and latches
- PULSE WIDTH MODULATION (PWM)
- STANDARD SERIAL INTERFACE UART
- Auxiliary Power Supply Isolated and Non-isolated
