LC4064ZE-7TN48I
| Parameters | |
|---|---|
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000ZE |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 241MHz |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 32 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TJ |
LC4064ZE-7TN48I Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is part of the 48-LQFP package.The device is programmed with 32 I/Os.48terminations are programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is supplied by a voltage of 1.8V volts.This part is part of the family [0].Trayshould be used for packaging the chip.Due to its reliability, it is operated at a temperature of [0].It is mounted in the way of Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000ZE series.It has 48pins programmed.It is also possible to find YESwhen using this device.The LC4064indicates that its related parts can be found.In order to achieve high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.In this case, Surface Mountis used to mount the electronic component.This board has 48 pins.With a maximum supply voltage of [0], it operates.A minimum supply voltage of 1.7V is required for this device to operate.It is possible to achieve a frequency of 241MHz.It has 4dedicated inputs for detecting input signals.A fundamental building block consists of 4logic elements/cells.
LC4064ZE-7TN48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4064ZE-7TN48I Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZE-7TN48I CPLDs applications.
- Protection relays
- Configurable Addressing of I/O Boards
- PLC analog input modules
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- DMA control
- Battery operated portable devices
- INTERRUPT SYSTEM
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- I2C BUS INTERFACE
- Voltage level translation
