LC4128B-10T128I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Number of Pins | 128 |
| Supplier Device Package | 128-TQFP (14x14) |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Base Part Number | LC4128 |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 92 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Number of Logic Elements/Cells | 8 |
| Max Frequency | 333MHz |
| Number of Programmable I/O | 92 |
| Number of Logic Blocks (LABs) | 8 |
| Number of Macro Cells | 128 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 8 |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128B-10T128I Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is packaged with 128-LQFP.It is programmed with 92 I/Os.As a result, it is packaged as Tray.The operating temperature of the machine is -40°C~105°C TJ to ensure its reliability.It is recommended that Surface Mountholds the chip in place.In this case, it is a type of FPGA belonging to the ispMACH? 4000B series.The LC4128indicates that related parts can be found.A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is recommended that data be stored in [0].In this case, it is mounted by Surface Mount.There are 128 pins on the device.A maximum voltage of 2.7Vis required for operation.A minimum supply voltage of 2.3V is required for this device to operate.A logic element or block has 8elements.There are 92 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. The maximal frequency should be lower than 333MHz.It is recommended that the operating temperature be higher than -40°C.It is recommended that the operating temperature be below 105°C.It consists of 8 logic blocks (LABs).The fundamental building block consists of 8logic elements/cells.
LC4128B-10T128I Features
128-LQFP package
92 I/Os
The operating temperature of -40°C~105°C TJ
128 pins
8 logic blocks (LABs)
LC4128B-10T128I Applications
There are a lot of Lattice Semiconductor Corporation LC4128B-10T128I CPLDs applications.
- Bootloaders for FPGAs
- Page register
- Cross-Matrix Switch
- POWER-SAVING MODES
- Discrete logic functions
- Multiple DIP Switch Replacement
- Multiple Clock Source Selection
- Preset swapping
- I/O PORTS (MCU MODULE)
- USB Bus
