LC4128B-27T100C
| Parameters | |
|---|---|
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 2.7 ns |
| Number of Logic Elements/Cells | 8 |
| Max Frequency | 333MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 2.7ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
LC4128B-27T100C Overview
This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is part of the 100-LQFP package.It is programmed with 64 I/Os.It is programmed to terminate devices at [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.It is powered by a voltage of 2.5V volts.This part is part of the family [0].It is packaged in the way of Tray.Ensure its reliability by operating at [0].It is recommended that the chip be mounted by Surface Mount.In FPGA terms, it is a type of ispMACH? 4000Bseries FPGA.The chip is programmed with 100 pins.When using this device, YEScan also be found.The LC4128indicates that related parts can be found.The supply voltage should be maintained at 2.5V for high efficiency.For storing data, it is recommended to use [0].It is mounted by Surface Mount.There are 100 pins embedded in the device.This device operates at a voltage of 2.7Vas its maximum supply voltage.Normally, it operates with a voltage of 2.3VV as its minimum supply voltage.There are 484 Programmable I/Os.The maximal frequency should be lower than 333MHz.To detect input signals, there are 10 dedicated inputs.Basic building blocks have 8logic elements.
LC4128B-27T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4128B-27T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4128B-27T100C CPLDs applications.
- Software-driven hardware configuration
- ToR/Aggregation/Core Switch and Router
- TIMERS/COUNTERS
- Synchronous or asynchronous mode
- ON-CHIP OSCILLATOR CIRCUIT
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Timing control
- Power automation
- Field programmable gate
- Battery operated portable devices
