LC4128B-27TN100C
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 2.7 ns |
| Organization | 4 DEDICATED INPUTS, 92 I/O |
| Number of Logic Elements/Cells | 8 |
| Max Frequency | 333MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 2.7ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
LC4128B-27TN100C Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.There is a 100-LQFP package containing it.It is equipped with 64I/O ports.It is programmed that device terminations will be 100 .There is a QUADterminal position on the electrical part in question.Power is supplied by a voltage of 2.5V volts.It is a part of the family [0].The chip should be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Mount the chip by Surface Mount.It belongs to the ispMACH? 4000Bseries of FPGAs.Chips are programmed with 100 pins.When using this device, YEScan also be found.The LC4128shows its related parts.If high efficiency is desired, the supply voltage should be kept at [0].EEPROM is adopted for storing data.Surface Mountis the mounting point of this electronic part.100pins are included in its design.A maximum supply voltage of 2.7Vis used in its operation.The minimal supply voltage is 2.3V.There are 484 Programmable I/Os.It should be below 333MHzat the maximal frequency.The status of input signals is detected by 4dedicated inputs.A fundamental building block of logic consists of 8logic elements/cells.
LC4128B-27TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4128B-27TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4128B-27TN100C CPLDs applications.
- DDC INTERFACE
- Digital designs
- Software-driven hardware configuration
- DMA control
- Cross-Matrix Switch
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Field programmable gate
- PLC analog input modules
- POWER-SAVING MODES
- Interface bridging
