LC4128B-5T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 8 |
| Max Frequency | 333MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128B-5T100C Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.You can find it in package [0].There are 64 I/Os programmed in it.It is programmed that device terminations will be 100 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.An electrical supply voltage of 2.5V is used to power it.It belongs to the family [0].It is packaged in the way of Tray.A reliable operation is ensured by the operating temperature of [0].Ensure that the chip is mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000B series.There are 100pins on the chip.It is also characterized by YES.The LC4128indicates that related parts can be found.It is recommended that the supply voltage be kept at 2.5Vto maximize efficiency.EEPROM is adopted for storing data.Surface Mountmounts this electronic component.This board has 100 pins.A voltage of 2.7V is the maximum supply voltage for this device.The minimal supply voltage is 2.3V.In total, there are 484programmable I/Os.The maximal frequency should be lower than 333MHz.To detect the status of input signals, there are 10dedicated inputs.An elementary building block consists of 8logic elements/cells.
LC4128B-5T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4128B-5T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4128B-5T100C CPLDs applications.
- Address decoding
- POWER-SAVING MODES
- Software-driven hardware configuration
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- PLC analog input modules
- Wide Vin Industrial low power SMPS
- Software-Driven Hardware Configuration
- Power Meter SMPS
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Boolean function generators
