LC4128B-75T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 333MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128B-75T100C Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.There is a 100-LQFP package containing it.It is equipped with 64I/O ports.100terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.An electrical supply voltage of 2.5V is used to power it.There is a part in the family [0].Trayshould be used for packaging the chip.The operating temperature of the machine is 0°C~90°C TJ to ensure its reliability.Ensure that the chip is mounted by Surface Mount.As part of the ispMACH? 4000Bseries, it is a type of FPGA.100pins are programmed on the chip.This device also displays [0].According to the LC4128, its related parts can be found.The supply voltage should be maintained at 2.5V for high efficiency.For storing data, it is recommended to use [0].A Surface Mountis mounted on this electronic component.100pins are included in its design.A maximum voltage of 2.7Vis required for operation.A minimum supply voltage of 2.3V is required for it to operate.There are 8 logic elements/blocks.A total of 484programmable I/Os are available.The maximum frequency should not exceed 333MHz.The status of input signals is detected by 10dedicated inputs.
LC4128B-75T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4128B-75T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4128B-75T100C CPLDs applications.
- ToR/Aggregation/Core Switch and Router
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Power up sequencing
- Preset swapping
- INTERRUPT SYSTEM
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- ON-CHIP OSCILLATOR CIRCUIT
- I/O PORTS (MCU MODULE)
- Auxiliary Power Supply Isolated and Non-isolated
- Field programmable gate
