LC4128B-75TN100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Organization | 4 DEDICATED INPUTS, 92 I/O |
| Max Frequency | 333MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4128B-75TN100C Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is contained in package [0].This device has 64 I/O ports programmed into it.There are 100 terminations programmed into the device.This electrical component has a terminal position of 0.The power source is powered by 2.5Vvolts.It is included in Programmable Logic Devices.The chip should be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4000B series.A chip with 100pins is programmed.If you use this device, you will also find [0].According to the LC4128, its related parts can be found.The supply voltage should be maintained at 2.5V for high efficiency.For storing data, it is recommended to use [0].In this case, it is mounted by Surface Mount.There are 100pins on it.A voltage of 2.7V is the maximum supply voltage for this device.Initially, it requires a voltage of 2.3Vas the minimum supply voltage.8logic blocks/elements are present.There are 484 Programmable I/Os.The maximal frequency should be lower than 333MHz.Input signals are detected by 4dedicated inputs.
LC4128B-75TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4128B-75TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4128B-75TN100C CPLDs applications.
- High speed graphics processing
- Battery operated portable devices
- Software Configuration of Add-In Boards
- Random logic replacement
- Wide Vin Industrial low power SMPS
- Interface bridging
- Software-Driven Hardware Configuration
- Storage Cards and Storage Racks
- INTERRUPT SYSTEM
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
