LC4128B-75TN128C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LC4128 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 92 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 333MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4128B-75TN128C Overview
This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is embedded in the 128-LQFP package.The device is programmed with 92 I/O ports.There are 128 terminations programmed into the device.Its terminal position is QUAD.The power supply voltage is 2.5V.There is a part included in Programmable Logic Devices.As a result, it is packaged as Tray.The device operates at a temperature of 0°C~90°C TJin order to ensure its reliability.There should be a Surface Mounton the chip.It is a type of FPGA belonging to the ispMACH? 4000B series.It is equipped with 128 pin count.When using this device, YEScan also be found.You can find its related parts in the [0].Optimal efficiency requires a supply voltage of [0].For storing data, it is recommended to use [0].The electronic component is mounted by Surface Mount.This device operates at a voltage of 2.7Vas its maximum supply voltage.It is powered by 2.3Vas its minimum supply voltage.A total of 8logic elements/blocks are present.A total of 484 Programmable I/Os are available.It should be below 333MHzat the maximal frequency.Input signals are detected by 4dedicated inputs.
LC4128B-75TN128C Features
128-LQFP package
92 I/Os
The operating temperature of 0°C~90°C TJ
128 pin count
LC4128B-75TN128C Applications
There are a lot of Lattice Semiconductor Corporation LC4128B-75TN128C CPLDs applications.
- POWER-SAVING MODES
- Auxiliary Power Supply Isolated and Non-isolated
- Multiple Clock Source Selection
- USB Bus
- ON-CHIP OSCILLATOR CIRCUIT
- Power Meter SMPS
- Digital designs
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Bootloaders for FPGAs
- Timing control
