LC4128C-10T100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Max Frequency | 333MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128C-10T100I Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).You can find it in package [0].It is equipped with 64I/O ports.It is programmed that device terminations will be 100 .This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.There is 1.8V voltage supply for this device.It is a part of family [0].It is recommended that the chip be packaged by Tray.It operates with the operating temperature of -40°C~105°C TJ to ensure its reliability.Surface Mountshould be used for mounting the chip.This type of FPGA is a part of the ispMACH? 4000C series.In this chip, the 100pins are programmed.This device can also display [0].The LC4128can be used to identify its related parts.For high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.In this case, it is mounted by Surface Mount.The pins are [0].A voltage of 1.95V is the maximum supply voltage for this device.With a minimal supply voltage of [0], it operates.There are 8 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.There should be a lower maximum frequency than 333MHz.The status of input signals is determined by 10dedicated inputs.
LC4128C-10T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4128C-10T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4128C-10T100I CPLDs applications.
- Power automation
- Battery operated portable devices
- LED Lighting systems
- Address decoders
- I2C BUS INTERFACE
- Complex programmable logic devices
- STANDARD SERIAL INTERFACE UART
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Software Configuration of Add-In Boards
