LC4128C-27T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 2.7 ns |
| Max Frequency | 333MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 2.7ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128C-27T100C Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The product is contained in a 100-LQFP package.As you can see, this device has 64 I/O ports programmed into it.The termination of a device is set to [0].The terminal position of this electrical component is QUAD.The power source is powered by 1.8Vvolts.It belongs to the family [0].As a result, it is packaged as Tray.The device operates at a temperature of 0°C~90°C TJin order to ensure its reliability.Surface Mountshould be used for mounting the chip.It belongs to the ispMACH? 4000Cseries of FPGAs.Chips are programmed with 100 pins.This device also displays [0].The LC4128indicates that its related parts can be found.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].A Surface Mountis mounted on this electronic component.A total of 100pins are provided on this board.With a maximum supply voltage of [0], it operates.The minimal supply voltage is 1.65V.A logic element or block has 8elements.There are 484 Programmable I/Os.It is important to make sure that the maximum frequency is less than 333MHz.The status of input signals is determined by 10dedicated inputs.
LC4128C-27T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4128C-27T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4128C-27T100C CPLDs applications.
- Programmable polarity
- Handheld digital devices
- Dedicated input registers
- Page register
- Programmable power management
- Interface bridging
- Auxiliary Power Supply Isolated and Non-isolated
- Power up sequencing
- Custom shift registers
- Complex programmable logic devices
