LC4128C-27T128C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 92 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 2.7 ns |
| Max Frequency | 333MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 2.7ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128C-27T128C Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is part of the 128-LQFP package.It is equipped with 92I/O ports.The termination of a device is set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power supply voltage is 1.8V.It belongs to the family [0].Trayshould be used to package the chip.The temperature at which it operates is set to 0°C~90°C TJin order to ensure its reliability.Mount the chip by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000C series.It is programmed with 128 pins.This device is also capable of displaying [0].The LC4128indicates that related parts can be found.If high efficiency is desired, the supply voltage should be kept at [0].It is adopted to store data in [0].This electronic part is mounted in the way of Surface Mount.This device operates at a voltage of 1.95Vas its maximum supply voltage.The minimal supply voltage is 1.65V.This logic block consists of 8logic elements.It should be below 333MHzat the maximal frequency.To detect the status of input signals, there are 4dedicated inputs.
LC4128C-27T128C Features
128-LQFP package
92 I/Os
The operating temperature of 0°C~90°C TJ
128 pin count
LC4128C-27T128C Applications
There are a lot of Lattice Semiconductor Corporation LC4128C-27T128C CPLDs applications.
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Protection relays
- Parity generators
- Digital designs
- Cross-Matrix Switch
- Wide Vin Industrial low power SMPS
- High speed graphics processing
- STANDARD SERIAL INTERFACE UART
- Storage Cards and Storage Racks
- ToR/Aggregation/Core Switch and Router
