LC4128C-27TN100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 384.6MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 2.7 ns |
| Turn On Delay Time | 2.7 ns |
| Number of Programmable I/O | 484 |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4128C-27TN100C Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The product is contained in a 100-LQFP package.In this case, there are 64 I/Os programmed.It is programmed to terminate devices at [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.An electrical supply voltage of 1.8V is used to power it.It belongs to the family [0].As a result, it is packaged as Tray.The operating temperature of the machine is 0°C~90°C TJ to ensure its reliability.Surface Mountshould be used for mounting the chip.The ispMACH? 4000Cseries FPGA is one of these types.100pins are programmed on the chip.It is also possible to find YESwhen using this device.The LC4128shows its related parts.It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.In general, it is recommended to store data in [0].In this case, Surface Mountis used to mount the electronic component.There are 100 pins on the device.A maximum supply voltage of 1.95Vis used in its operation.Normally, it operates with a voltage of 1.65VV as its minimum supply voltage.8logic elements/blocks exist.Programmable I/Os are counted up 484.There is a maximum frequency of 384.6MHz.There are 36 logic blocks (LABs) in its basic building block.Input signals are detected using 10dedicated inputs.
LC4128C-27TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
36 logic blocks (LABs)
LC4128C-27TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4128C-27TN100C CPLDs applications.
- Software-Driven Hardware Configuration
- Parity generators
- Software-driven hardware configuration
- Code converters
- Portable digital devices
- Battery operated portable devices
- I2C BUS INTERFACE
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Multiple Clock Source Selection
- PULSE WIDTH MODULATION (PWM)
