LC4128C-5T100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 8 |
| Max Frequency | 333MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128C-5T100I Overview
A mobile phone network consists of 128macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is embedded in the 100-LQFP package.The device is programmed with 64 I/Os.It is programmed to terminate devices at [0].The terminal position of this electrical component is QUAD.The power supply voltage is 1.8V.This part is part of the family [0].It is recommended to package the chip by Tray.It operates with the operating temperature of -40°C~105°C TJ to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000C series.It is equipped with 100 pin count.When using this device, YEScan also be found.The LC4128contains its related parts.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.Surface Mountis the mounting point of this electronic part.The device is designed with pins [0].It operates with the maximal supply voltage of 1.95V.Initially, it requires a voltage of 1.65Vas the minimum supply voltage.Ideally, the maximal frequency should be lower than 333MHz Hz.A total of 10dedicated inputs are available for the purpose of detecting input signals.As a fundamental building block, there are 8 logic elements/cells.
LC4128C-5T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4128C-5T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4128C-5T100I CPLDs applications.
- Software-driven hardware configuration
- DDC INTERFACE
- Multiple DIP Switch Replacement
- White goods (Washing, Cold, Aircon ,...)
- PLC analog input modules
- Software-Driven Hardware Configuration
- PULSE WIDTH MODULATION (PWM)
- Software Configuration of Add-In Boards
- State machine design
- Digital multiplexers
