LC4128C-5TN100I
| Parameters | |
|---|---|
| Propagation Delay | 5 ns |
| Max Frequency | 333MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
LC4128C-5TN100I Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is packaged with 100-LQFP.The device is programmed with 64 I/Os.Devices are programmed with terminations of [0].The terminal position of this electrical component is QUAD.The power supply voltage is 1.8V.The part belongs to Programmable Logic Devices family.It is packaged in the way of Tray.The temperature at which it operates is set to -40°C~105°C TJin order to ensure its reliability.It is recommended to mount the chip by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000C series.There are 100 pins on the chip.If you use this device, you will also find [0].According to the LC4128, its related parts can be found.A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is recommended that data be stored in [0].In this case, it is mounted by Surface Mount.The device is designed with pins [0].This device operates at a voltage of 1.95V when the maximum supply voltage is applied.A minimum supply voltage of 1.65V is required for it to operate.There are a total of 8 logic elements or blocks.It is recommended that the maximal frequency be lower than 333MHz.The input signals are detected by 10dedicated inputs.
LC4128C-5TN100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4128C-5TN100I Applications
There are a lot of Lattice Semiconductor Corporation LC4128C-5TN100I CPLDs applications.
- USB Bus
- Auxiliary Power Supply Isolated and Non-isolated
- Storage Cards and Storage Racks
- Interface bridging
- Configurable Addressing of I/O Boards
- Software-driven hardware configuration
- Timing control
- PLC analog input modules
- Bootloaders for FPGAs
- Boolean function generators
