LC4128C-75T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128C-75T100C Overview
A mobile phone network consists of 128macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is part of the 100-LQFP package.It is equipped with 64I/O ports.Terminations of devices are set to [0].This electrical component has a terminal position of 0.It is powered by a voltage of 1.8V volts.It is included in Programmable Logic Devices.Package the chip by Tray.The temperature at which it operates is set to 0°C~90°C TJin order to ensure its reliability.Mount the chip by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000C series.Chips are programmed with 100 pins.When using this device, YESis also available.The LC4128indicates that its related parts can be found.High efficiency requires the supply voltage to be maintained at [0].In this case, EEPROMwill be used to store the data.This electronic part is mounted in the way of Surface Mount.It is designed with 100 pins.There is a maximum supply voltage of 1.95Vwhen the device is operating.A minimum supply voltage of 1.65V is required for this device to operate.There are a total of 8 logic elements or blocks.There are a total of 484 Programmable I/Os.There is a maximum frequency of 178.57MHz.It has 10dedicated inputs for detecting input signals.The fundamental building block consists of 36logic elements/cells.
LC4128C-75T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4128C-75T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4128C-75T100C CPLDs applications.
- Storage Cards and Storage Racks
- Preset swapping
- PLC analog input modules
- High speed graphics processing
- Portable digital devices
- STANDARD SERIAL INTERFACE UART
- I2C BUS INTERFACE
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- PULSE WIDTH MODULATION (PWM)
- Battery operated portable devices
