LC4128C-75T100I
| Parameters | |
|---|---|
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 8 |
| Max Frequency | 333MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
LC4128C-75T100I Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the 100-LQFP package.The device is programmed with 64 I/Os.100terminations are programmed into the device.This electrical component has a terminal position of 0.There is 1.8V voltage supply for this device.It is a part of the family [0].Trayshould be used to package the chip.To ensure its reliability, the operating temperature is set to [0].It is recommended that the chip be mounted by Surface Mount.This type of FPGA is a part of the ispMACH? 4000C series.100pins are programmed on the chip.This device is also capable of displaying [0].According to the LC4128, its related parts can be found.High efficiency requires the supply voltage to be maintained at [0].In order to store data, EEPROMis used.It is mounted by Surface Mount.There are 100pins on it.With a maximum supply voltage of [0], it operates.Initially, it requires a voltage of 1.65Vas the minimum supply voltage.A total of 484 Programmable I/Os are available.It is recommended that the maximal frequency be lower than 333MHz.A total of 10dedicated inputs are available for detecting the status of input signals.In order to form a fundamental building block, there are 8 logic elements or cells.
LC4128C-75T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4128C-75T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4128C-75T100I CPLDs applications.
- ON-CHIP OSCILLATOR CIRCUIT
- Portable digital devices
- PLC analog input modules
- Custom shift registers
- Synchronous or asynchronous mode
- LED Lighting systems
- I2C BUS INTERFACE
- Dedicated input registers
- Multiple DIP Switch Replacement
- Boolean function generators
