LC4128C-75T128C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 92 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 333MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128C-75T128C Overview
128macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.You can find it in package [0].As you can see, this device has 92 I/O ports programmed into it.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.An electrical supply voltage of 1.8V is used to power it.This part is in the family [0].It is recommended that the chip be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].It is recommended to mount the chip by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000C series.Chips are programmed with 128 pins.This device can also display [0].You can find its related parts in the [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].In this case, EEPROMwill be used to store the data.This electronic part is mounted in the way of Surface Mount.There is a maximum supply voltage of 1.95V.A minimum supply voltage of 1.65V is required for this device to operate.In total, there are 8 logic elements/blocks.It is recommended that the maximum frequency be less than 333MHz.A total of 4dedicated inputs are available for detecting the status of input signals.
LC4128C-75T128C Features
128-LQFP package
92 I/Os
The operating temperature of 0°C~90°C TJ
128 pin count
LC4128C-75T128C Applications
There are a lot of Lattice Semiconductor Corporation LC4128C-75T128C CPLDs applications.
- Timing control
- Protection relays
- DDC INTERFACE
- Handheld digital devices
- Address decoders
- State machine control
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Software-driven hardware configuration
- Bootloaders for FPGAs
- TIMERS/COUNTERS
