LC4128V-10TN100I
| Parameters | |
|---|---|
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
LC4128V-10TN100I Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is part of the 100-LQFP package.The device has 64inputs and outputs.Terminations of devices are set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The device is powered by a voltage of 3.3V volts.The part is included in Programmable Logic Devices.Trayshould be used for packaging the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Chips should be mounted by Surface Mount.In FPGA terms, it is a type of ispMACH? 4000Vseries FPGA.In this chip, the 100pins are programmed.When using this device, YEScan also be found.In accordance with the [0], its related parts are listed.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.For data storage, EEPROMis adopted.This electronic part is mounted in the way of Surface Mount.There are 100 pins embedded in the device.There is a maximum supply voltage of 3.6Vwhen the device is operating.In order for it to operate, a supply voltage of 3Vis required.8logic elements/blocks exist.There is a maximum frequency of 125MHz.The status of input signals is determined by 10dedicated inputs.In order to form a fundamental building block, there are 36 logic elements or cells.
LC4128V-10TN100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4128V-10TN100I Applications
There are a lot of Lattice Semiconductor Corporation LC4128V-10TN100I CPLDs applications.
- Preset swapping
- Power up sequencing
- High speed graphics processing
- PLC analog input modules
- Address decoding
- Custom shift registers
- Software-Driven Hardware Configuration
- DMA control
- Address decoders
- Synchronous or asynchronous mode
