LC4128V-10TN144I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Weight | 1.319103g |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4128 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 96 |
| Memory Type | EEPROM |
| Propagation Delay | 2.7 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4128V-10TN144I Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is packaged with 144-LQFP.This device has 96 I/O ports programmed into it.144terminations have been programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is supplied by a voltage of 3.3V volts.This part is included in Programmable Logic Devices.Trayis the packaging method.To ensure its reliability, the operating temperature is set to [0].It is recommended that Surface Mountholds the chip in place.It belongs to the ispMACH? 4000Vseries of FPGAs.Chips are programmed with 144 pins.The device can also be used to find [0].You can find its related parts in the [0].Optimal efficiency requires a supply voltage of [0].For data storage, EEPROMis adopted.Surface Mountis used to mount this electronic component.This board has 144 pins.In this case, the maximum supply voltage is 3.6V.It is powered by 3Vas its minimum supply voltage.In total, there are 8 logic elements/blocks.This frequency can be achieved at 125MHz.The status of input signals is detected by 4dedicated inputs.A fundamental building block consists of 36logic elements/cells.
LC4128V-10TN144I Features
144-LQFP package
96 I/Os
The operating temperature of -40°C~105°C TJ
144 pin count
144 pins
LC4128V-10TN144I Applications
There are a lot of Lattice Semiconductor Corporation LC4128V-10TN144I CPLDs applications.
- ToR/Aggregation/Core Switch and Router
- Complex programmable logic devices
- DMA control
- Page register
- Software-Driven Hardware Configuration
- Programmable power management
- Software Configuration of Add-In Boards
- Preset swapping
- PULSE WIDTH MODULATION (PWM)
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
