LC4128V-27TN128C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Weight | 503.487531mg |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 384.6MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4128 |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 92 |
| Memory Type | EEPROM |
| Propagation Delay | 2.7 ns |
| Turn On Delay Time | 2.7 ns |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4128V-27TN128C Overview
128macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.In the 128-LQFPpackage, you will find it.As you can see, this device has 92 I/O ports programmed into it.There are 128 terminations programmed into the device.The terminal position of this electrical component is QUAD.A voltage of 3.3V is used as the power supply for this device.It is a part of family [0].It is recommended that the chip be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].There should be a Surface Mounton the chip.In this case, it is a type of FPGA belonging to the ispMACH? 4000V series.It is programmed with 128 pins.It is also possible to find YESwhen using this device.LC4128contains its related parts.If high efficiency is to be achieved, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.A Surface Mountis mounted on this electronic component.This device operates at a voltage of 3.6Vas its maximum supply voltage.Normally, it operates with a voltage of 3VV as its minimum supply voltage.A logic element or block has 8elements.There is a maximum frequency of 384.6MHz.In total, it contains 36 logic blocks (LABs).To detect the status of input signals, there are 4dedicated inputs.
LC4128V-27TN128C Features
128-LQFP package
92 I/Os
The operating temperature of 0°C~90°C TJ
128 pin count
36 logic blocks (LABs)
LC4128V-27TN128C Applications
There are a lot of Lattice Semiconductor Corporation LC4128V-27TN128C CPLDs applications.
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- PLC analog input modules
- TIMERS/COUNTERS
- Auxiliary Power Supply Isolated and Non-isolated
- Address decoders
- Power up sequencing
- Synchronous or asynchronous mode
- Programmable polarity
- Handheld digital devices
- Dedicated input registers
