LC4128V-5T128I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Weight | 503.487531mg |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 92 |
| Memory Type | EEPROM |
| Propagation Delay | 2.7 ns |
| Max Frequency | 333MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128V-5T128I Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the 128-LQFPpackage, you will find it.As a result, it has 92 I/O ports programmed.There are 128 terminations programmed into the device.QUADis the terminal position of this electrical part.Power is supplied by a voltage of 3.3V volts.It belongs to the family [0].Trayshould be used for packaging the chip.The device operates at a temperature of -40°C~105°C TJin order to ensure its reliability.It is recommended to mount the chip by Surface Mount.The ispMACH? 4000Vseries comprises this type of FPGA.128pins are programmed on the chip.If you use this device, you will also find [0].LC4128contains its related parts.Optimal efficiency requires a supply voltage of [0].EEPROM is adopted for storing data.Surface Mountmounts this electronic component.A maximum supply voltage of 3.6Vis used in its operation.It operates with the minimal supply voltage of 3V.A logic element or block has 8elements.It should be below 333MHzat the maximal frequency.Input signals are detected by 4dedicated inputs.
LC4128V-5T128I Features
128-LQFP package
92 I/Os
The operating temperature of -40°C~105°C TJ
128 pin count
LC4128V-5T128I Applications
There are a lot of Lattice Semiconductor Corporation LC4128V-5T128I CPLDs applications.
- Bootloaders for FPGAs
- ON-CHIP OSCILLATOR CIRCUIT
- Reset swapping
- White goods (Washing, Cold, Aircon ,...)
- D/T registers and latches
- Software-driven hardware configuration
- LED Lighting systems
- I2C BUS INTERFACE
- Address decoders
- Digital systems
