LC4128V-5T144C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 227.27MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 96 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 680 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128V-5T144C Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).There is a 144-LQFP package containing it.It is programmed with 96 I/Os.There are 144 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 3.3Vprovides power to the device.The part is included in Programmable Logic Devices.It is recommended to package the chip by Tray.The device operates at a temperature of 0°C~90°C TJin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000V series.Chips are programmed with 144 pins.It is also possible to find YESwhen using this device.There are related parts in [0].Optimal efficiency requires a supply voltage of [0].EEPROM is adopted for storing data.Surface Mountis used to mount this electronic component.There are 144 pins embedded in the device.In this case, the maximum supply voltage is 3.6V.A minimum supply voltage of 3V is required for this device to operate.This logic block consists of 8logic elements.A total of 680 Programmable I/Os are available.There is 227.27MHz frequency that can be achieved.A total of 4dedicated inputs are available for the purpose of detecting input signals.In order to form a fundamental building block, there are 36 logic elements or cells.
LC4128V-5T144C Features
144-LQFP package
96 I/Os
The operating temperature of 0°C~90°C TJ
144 pin count
144 pins
LC4128V-5T144C Applications
There are a lot of Lattice Semiconductor Corporation LC4128V-5T144C CPLDs applications.
- Complex programmable logic devices
- STANDARD SERIAL INTERFACE UART
- ROM patching
- Address decoding
- I/O expansion
- State machine control
- Multiple Clock Source Selection
- Handheld digital devices
- POWER-SAVING MODES
- Boolean function generators
