LC4128V-5TN100C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 227.27MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Logic Elements/Cells | 540 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4128V-5TN100C Overview
This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is contained in package [0].The device has 64inputs and outputs.The termination of a device is set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 3.3V is used as the power supply for this device.It is a part of family [0].Ideally, the chip should be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Ensure that the chip is mounted by Surface Mount.FPGAs belonging to the ispMACH? 4000Vseries contain this type of chip.Chips are programmed with 100 pins.When using this device, YEScan also be found.According to the LC4128, its related parts can be found.For high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].A Surface Mountis mounted on this electronic component.It is designed with 100 pins.In this case, the maximum supply voltage is 3.6V.With a minimal supply voltage of [0], it operates.There are 8 logic elements/blocks.The frequency that can be achieved is 227.27MHz.A total of 10dedicated inputs are available for detecting the status of input signals.Basic building blocks have 540logic elements.
LC4128V-5TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4128V-5TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4128V-5TN100C CPLDs applications.
- Interface bridging
- Software Configuration of Add-In Boards
- DDC INTERFACE
- Power Meter SMPS
- Programmable polarity
- POWER-SAVING MODES
- ToR/Aggregation/Core Switch and Router
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Programmable power management
- Auxiliary Power Supply Isolated and Non-isolated
