LC4128V-5TN128I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 227.27MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4128 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 92 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Logic Elements/Cells | 8 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4128V-5TN128I Overview
In the mobile phone network, there are 128macro cells, which are cells with high-power antennas and towers.The item is enclosed in a 128-LQFP package.There are 92 I/Os programmed in it.128terminations are programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.A voltage of 3.3V is used as the power supply for this device.This part is included in Programmable Logic Devices.Trayshould be used for packaging the chip.The device operates at a temperature of -40°C~105°C TJin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In FPGA terms, it is a type of ispMACH? 4000Vseries FPGA.The chip is programmed with 128 pins.It is also characterized by YES.Its related parts can be found in the [0].If high efficiency is desired, the supply voltage should be kept at [0].It is recommended to store data in [0].In this case, Surface Mountis used to mount the electronic component.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.Despite its minimal supply voltage of [0], it is capable of operating.This can be achieved at a frequency of 227.27MHz.It has 4dedicated inputs for detecting input signals.In order to form a fundamental building block, there are 8 logic elements or cells.
LC4128V-5TN128I Features
128-LQFP package
92 I/Os
The operating temperature of -40°C~105°C TJ
128 pin count
LC4128V-5TN128I Applications
There are a lot of Lattice Semiconductor Corporation LC4128V-5TN128I CPLDs applications.
- USB Bus
- High speed graphics processing
- Code converters
- Power automation
- Battery operated portable devices
- Portable digital devices
- Power up sequencing
- I2C BUS INTERFACE
- Timing control
- Address decoders
