LC4128V-5TN144C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 227.27MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4128 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 96 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 680 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4128V-5TN144C Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is part of the 144-LQFP package.This device has 96 I/O ports programmed into it.There is a 144terminations set on devices.This electrical part is wired with a terminal position of QUAD.A voltage of 3.3V is used as the power supply for this device.This part is in the family [0].Ideally, the chip should be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].Ensure that the chip is mounted by Surface Mount.The ispMACH? 4000Vseries FPGA is one of these types.144pins are programmed on the chip.If this device is used, you will also be able to find [0].The LC4128contains its related parts.Optimal efficiency requires a supply voltage of [0].In order to store data, EEPROMis used.In this case, Surface Mountis used to mount the electronic component.The 144pins are designed into the board.It operates with the maximal supply voltage of 3.6V.Normally, it operates with a voltage of 3VV as its minimum supply voltage.There are 8 logic elements or blocks present.There are 680 Programmable I/Os.This frequency is 227.27MHz.A total of 4dedicated inputs are available for the purpose of detecting input signals.In order to form a fundamental building block, there are 36 logic elements or cells.
LC4128V-5TN144C Features
144-LQFP package
96 I/Os
The operating temperature of 0°C~90°C TJ
144 pin count
144 pins
LC4128V-5TN144C Applications
There are a lot of Lattice Semiconductor Corporation LC4128V-5TN144C CPLDs applications.
- ToR/Aggregation/Core Switch and Router
- Power automation
- Multiple DIP Switch Replacement
- Complex programmable logic devices
- USB Bus
- Discrete logic functions
- Protection relays
- I2C BUS INTERFACE
- STANDARD SERIAL INTERFACE UART
- Wide Vin Industrial low power SMPS
