LC4128V-5TN144I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 227.27MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4128 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 96 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Logic Elements/Cells | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4128V-5TN144I Overview
In the mobile phone network, there are 128macro cells, which are cells with high-power antennas and towers.144-LQFPis the package in which it resides.The device is programmed with 96 I/Os.144terminations are programmed into the device.There is a QUADterminal position on the electrical part in question.The device is powered by a voltage of 3.3V volts.The part is included in Programmable Logic Devices.The chip should be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended to mount the chip by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000V series.A chip with 144pins is programmed.If you use this device, you will also find [0].The LC4128indicates that related parts can be found.High efficiency requires the supply voltage to be maintained at [0].For data storage, EEPROMis adopted.In this case, it is mounted by Surface Mount.There are 144 pins embedded in the device.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.Despite its minimal supply voltage of [0], it is capable of operating.There are 8 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.In this case, 227.27MHzis the frequency that can be achieved.Input signals are detected by 4dedicated inputs.A fundamental building block consists of 36logic elements/cells.
LC4128V-5TN144I Features
144-LQFP package
96 I/Os
The operating temperature of -40°C~105°C TJ
144 pin count
144 pins
LC4128V-5TN144I Applications
There are a lot of Lattice Semiconductor Corporation LC4128V-5TN144I CPLDs applications.
- Multiple Clock Source Selection
- Software-Driven Hardware Configuration
- White goods (Washing, Cold, Aircon ,...)
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Bootloaders for FPGAs
- Complex programmable logic devices
- USB Bus
- Parity generators
- Auxiliary Power Supply Isolated and Non-isolated
- ON-CHIP OSCILLATOR CIRCUIT
