LC4128V-75T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128V-75T100C Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The item is enclosed in a 100-LQFP package.There are 64 I/Os programmed in it.It is programmed that device terminations will be 100 .This electrical part has a terminal position of QUADand is connected to the ground.Power is provided by a supply voltage of 3.3V volts.The part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Mount the chip by Surface Mount.FPGAs belonging to the ispMACH? 4000Vseries contain this type of chip.100pins are programmed on the chip.If you use this device, you will also find [0].According to the LC4128, its related parts can be found.High efficiency requires the supply voltage to be maintained at [0].It is adopted to store data in [0].The electronic component is mounted by Surface Mount.This board has 100 pins.It operates at a maximum supply voltage of 3.6V volts.Normally, it operates with a voltage of 3VV as its minimum supply voltage.There are a total of 8 logic elements or blocks.There is 178.57MHz frequency that can be achieved.There are 10 dedicated inputs used to detect the status of input signals.A fundamental building block of logic consists of 36logic elements/cells.
LC4128V-75T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4128V-75T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4128V-75T100C CPLDs applications.
- Field programmable gate
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Address decoders
- Cross-Matrix Switch
- Power automation
- State machine control
- Voltage level translation
- Code converters
- Wide Vin Industrial low power SMPS
- Protection relays
