LC4128V-75T100E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 8 |
| Number of Programmable I/O | 680 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128V-75T100E Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a 100-LQFP package containing it.It is equipped with 64I/O ports.Terminations of devices are set to [0].Its terminal position is QUAD.The device is powered by a voltage of 3.3V volts.This part is in the family [0].As a result, it is packaged as Tray.It operates with the operating temperature of -40°C~130°C TJ to ensure its reliability.There should be a Surface Mounton the chip.This type of FPGA is a part of the ispMACH? 4000V series.It is programmed with 100 pins.Additionally, this device is capable of displaying [0].The LC4128indicates that related parts can be found.A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is recommended that data be stored in [0].Surface Mountis used to mount this electronic component.The 100pins are designed into the board.In this case, the maximum supply voltage is 3.6V.It is powered by 3Vas its minimum supply voltage.There are a total of 680 Programmable I/Os.You can achieve 178.57MHzfrequencies.It has 10dedicated inputs for detecting input signals.There are 8 logic elements/cells on the device.
LC4128V-75T100E Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~130°C TJ
100 pin count
100 pins
LC4128V-75T100E Applications
There are a lot of Lattice Semiconductor Corporation LC4128V-75T100E CPLDs applications.
- Auxiliary Power Supply Isolated and Non-isolated
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Battery operated portable devices
- Wide Vin Industrial low power SMPS
- STANDARD SERIAL INTERFACE UART
- Programmable power management
- D/T registers and latches
- USB Bus
- Power up sequencing
- Preset swapping
