LC4128V-75T144E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 96 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 8 |
| Max Frequency | 333MHz |
| Number of Programmable I/O | 680 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128V-75T144E Overview
In the mobile phone network, there are 128macro cells, which are cells with high-power antennas and towers.144-LQFPis the package in which it resides.In this case, there are 96 I/Os programmed.It is programmed that device terminations will be 144 .This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power source is powered by 3.3Vvolts.There is a part included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].Mount the chip by Surface Mount.It belongs to the ispMACH? 4000Vseries of FPGAs.The chip is programmed with 144 pins.If this device is used, you will also be able to find [0].The LC4128indicates that related parts can be found.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In order to store data, EEPROMis used.Surface Mountmounts this electronic component.There are 144 pins on the device.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.The minimal supply voltage is 3V.There are 680 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It should be below 333MHzat the maximal frequency.The input signals are detected by 4dedicated inputs.In order to form a fundamental building block, there are 8 logic elements or cells.
LC4128V-75T144E Features
144-LQFP package
96 I/Os
The operating temperature of -40°C~130°C TJ
144 pin count
144 pins
LC4128V-75T144E Applications
There are a lot of Lattice Semiconductor Corporation LC4128V-75T144E CPLDs applications.
- Battery operated portable devices
- Cross-Matrix Switch
- Custom shift registers
- Preset swapping
- Digital systems
- Address decoding
- Parity generators
- Page register
- PLC analog input modules
- Power Meter SMPS
