LC4128V-75T144I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 96 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 680 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128V-75T144I Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.There is a 144-LQFP package containing it.It is equipped with 96I/O ports.144terminations are programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is provided by a supply voltage of 3.3V volts.This part is included in Programmable Logic Devices.Trayshould be used for packaging the chip.It operates with the operating temperature of -40°C~105°C TJ to ensure its reliability.It is mounted in the way of Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000V series.The chip is programmed with 144 pins.If this device is used, you will also be able to find [0].The LC4128contains its related parts.If high efficiency is desired, the supply voltage should be kept at [0].For data storage, EEPROMis adopted.Surface Mountis the mounting point of this electronic part.The pins are [0].It operates with the maximal supply voltage of 3.6V.The minimal supply voltage is 3V.A logic element or block has 8elements.There are a total of 680 Programmable I/Os.This frequency can be achieved at 178.57MHz.To detect the status of input signals, there are 4dedicated inputs.There are 36 logic elements/cells on the device.
LC4128V-75T144I Features
144-LQFP package
96 I/Os
The operating temperature of -40°C~105°C TJ
144 pin count
144 pins
LC4128V-75T144I Applications
There are a lot of Lattice Semiconductor Corporation LC4128V-75T144I CPLDs applications.
- Digital multiplexers
- Boolean function generators
- I2C BUS INTERFACE
- Wide Vin Industrial low power SMPS
- Address decoders
- Protection relays
- Discrete logic functions
- High speed graphics processing
- Reset swapping
- POWER-SAVING MODES
