LC4128ZC-75M132C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 132-LFBGA, CSPBGA |
| Number of Pins | 132 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 132 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 168μA |
| Number of I/O | 96 |
| Nominal Supply Current | 168μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 8 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Height Seated (Max) | 1.35mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128ZC-75M132C Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is part of the 132-LFBGA, CSPBGA package.This device has 96 I/O ports programmed into it.It is programmed to terminate devices at [0].The terminal position of this electrical component is BOTTOM.The power source is powered by 1.8Vvolts.This part is included in Programmable Logic Devices.It is packaged in the way of Tray.The device operates at a temperature of 0°C~90°C TJin order to ensure its reliability.Chips should be mounted by Surface Mount.This type of FPGA is a part of the ispMACH? 4000Z series.With 132pins programmed, the chip is ready to use.It is also possible to find YESwhen using this device.The LC4128contains its related parts.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data storage is performed using [0].In this case, it is mounted by Surface Mount.132pins are included in its design.In this case, the maximum supply voltage is 1.9V.Normally, it operates with a voltage of 1.7VV as its minimum supply voltage.This can be achieved at a frequency of 178.57MHz.There are 4 dedicated inputs used to detect the status of input signals.As a fundamental building block, there are 8 logic elements/cells.
LC4128ZC-75M132C Features
132-LFBGA, CSPBGA package
96 I/Os
The operating temperature of 0°C~90°C TJ
132 pin count
132 pins
LC4128ZC-75M132C Applications
There are a lot of Lattice Semiconductor Corporation LC4128ZC-75M132C CPLDs applications.
- Voltage level translation
- Programmable power management
- DDC INTERFACE
- Battery operated portable devices
- ROM patching
- Field programmable gate
- INTERRUPT SYSTEM
- DMA control
- Dedicated input registers
- ToR/Aggregation/Core Switch and Router
