LC4128ZC-75T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 168μA |
| Number of I/O | 64 |
| Nominal Supply Current | 168μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 680 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128ZC-75T100C Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.You can find it in package [0].This device has 64 I/O ports programmed into it.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.QUADis the terminal position of this electrical part.It is powered from a supply voltage of 1.8V.There is a part included in Programmable Logic Devices.Trayis the packaging method.Due to its reliability, it is operated at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000Z series.There are 100 pins on the chip.If you use this device, you will also find [0].You can find its related parts in the [0].Optimal efficiency requires a supply voltage of [0].It is recommended that data be stored in [0].A Surface Mountis mounted on this electronic component.There are 100 pins on the device.It operates with the maximal supply voltage of 1.9V.Despite its minimal supply voltage of [0], it is capable of operating.There are a total of 8 logic elements or blocks.A total of 680programmable I/Os are available.There is 178.57MHz frequency that can be achieved.To detect the status of input signals, there are 10dedicated inputs.In order to form a fundamental building block, there are 36 logic elements or cells.
LC4128ZC-75T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4128ZC-75T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4128ZC-75T100C CPLDs applications.
- Reset swapping
- TIMERS/COUNTERS
- Power Meter SMPS
- D/T registers and latches
- Wide Vin Industrial low power SMPS
- Page register
- State machine design
- I/O PORTS (MCU MODULE)
- Discrete logic functions
- Complex programmable logic devices
