LC4128ZC-75TN100E
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 168μA |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 4.2 ns |
| Number of Logic Elements/Cells | 8 |
| Max Frequency | 220MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
LC4128ZC-75TN100E Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).In the 100-LQFPpackage, you will find it.The device is programmed with 64 I/O ports.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The device is powered by a voltage of 1.8V volts.It is a part of the family [0].As a result, it is packaged as Tray.The temperature at which it operates is set to -40°C~130°C TJin order to ensure its reliability.Chips should be mounted by Surface Mount.As part of the ispMACH? 4000Zseries, it is a type of FPGA.In this chip, the 100pins are programmed.The device can also be used to find [0].LC4128contains its related parts.Optimal efficiency requires a supply voltage of [0].Data storage is performed using [0].This device is mounted by Surface Mount.The device is designed with pins [0].This device operates at a voltage of 1.9V when the maximum supply voltage is applied.The minimal supply voltage is 1.6V.It is important to make sure that the maximum frequency is less than 220MHz.A total of 10dedicated inputs are available for the purpose of detecting input signals.In order to form a fundamental building block, there are 8logic elements/cells.
LC4128ZC-75TN100E Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~130°C TJ
100 pin count
100 pins
LC4128ZC-75TN100E Applications
There are a lot of Lattice Semiconductor Corporation LC4128ZC-75TN100E CPLDs applications.
- POWER-SAVING MODES
- Bootloaders for FPGAs
- Power up sequencing
- Software Configuration of Add-In Boards
- Random logic replacement
- PLC analog input modules
- DDC INTERFACE
- Software-driven hardware configuration
- ON-CHIP OSCILLATOR CIRCUIT
- Address decoders
