LC4128ZE-7MN144C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-TFBGA, CSPBGA |
| Number of Pins | 144 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000ZE |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 200MHz |
| Base Part Number | LC4128 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 168μA |
| Number of I/O | 96 |
| Nominal Supply Current | 168μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 8 |
| Number of Programmable I/O | 64 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Height Seated (Max) | 1.1mm |
| Length | 7mm |
| Width | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4128ZE-7MN144C Overview
In the mobile phone network, there are 128macro cells, which are cells with high-power antennas and towers.It is part of the 144-TFBGA, CSPBGA package.The device is programmed with 96 I/O ports.The termination of a device is set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power supply voltage is 1.8V.This part is in the family [0].As a result, it is packaged as Tray.During operation, the operating temperature is kept at 0°C~90°C TJ to ensure its reliability.Surface Mountshould be used for mounting the chip.As part of the ispMACH? 4000ZEseries, it is a type of FPGA.A chip with 144pins is programmed.When using this device, YEScan also be found.There are related parts in [0].Optimal efficiency requires a supply voltage of [0].For storing data, it is recommended to use [0].The electronic component is mounted by Surface Mount.A total of 144pins are provided on this board.This device operates at a voltage of 1.9V when the maximum supply voltage is applied.With a minimal supply voltage of [0], it operates.Currently, there are 64 Programmable I/Os available.You can achieve 200MHzfrequencies.A total of 4dedicated inputs are available for the purpose of detecting input signals.In order to form a fundamental building block, there are 8logic elements/cells.
LC4128ZE-7MN144C Features
144-TFBGA, CSPBGA package
96 I/Os
The operating temperature of 0°C~90°C TJ
144 pin count
144 pins
LC4128ZE-7MN144C Applications
There are a lot of Lattice Semiconductor Corporation LC4128ZE-7MN144C CPLDs applications.
- Battery operated portable devices
- STANDARD SERIAL INTERFACE UART
- I/O PORTS (MCU MODULE)
- ROM patching
- DDC INTERFACE
- Random logic replacement
- Wide Vin Industrial low power SMPS
- Handheld digital devices
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Page register
