LC4128ZE-7TN144C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Weight | 1.319103g |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000ZE |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 200MHz |
| Base Part Number | LC4128 |
| Pin Count | 144 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 168μA |
| Number of I/O | 96 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 8 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Height | 1.4mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4128ZE-7TN144C Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].The device is programmed with 96 I/Os.There are 144 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.QUADis the terminal position of this electrical part.It is powered from a supply voltage of 1.8V.It is included in Programmable Logic Devices.As a result, it is packaged as Tray.The device operates at a temperature of 0°C~90°C TJin order to ensure its reliability.It is mounted in the way of Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000ZE series.A chip with 144pins is programmed.If you use this device, you will also find [0].LC4128contains its related parts.Optimal efficiency requires a supply voltage of [0].It is recommended that data be stored in [0].Surface Mountis used to mount this electronic component.There are 144 pins embedded in the device.A maximum voltage of 1.9Vis required for operation.Despite its minimal supply voltage of [0], it is capable of operating.There is 200MHz frequency that can be achieved.The input signals are detected by 4dedicated inputs.There are 8 logic elements/cells on the device.
LC4128ZE-7TN144C Features
144-LQFP package
96 I/Os
The operating temperature of 0°C~90°C TJ
144 pin count
144 pins
LC4128ZE-7TN144C Applications
There are a lot of Lattice Semiconductor Corporation LC4128ZE-7TN144C CPLDs applications.
- POWER-SAVING MODES
- Auxiliary Power Supply Isolated and Non-isolated
- Custom state machines
- Field programmable gate
- Programmable power management
- Cross-Matrix Switch
- Synchronous or asynchronous mode
- Preset swapping
- Pattern recognition
- Reset swapping
