LC4128ZE-7UMN132C
| Parameters | |
|---|---|
| Package / Case | 132-VFBGA |
| Number of Pins | 132 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000ZE |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Frequency | 178.57MHz |
| Base Part Number | LC4128 |
| Pin Count | 132 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 168μA |
| Number of I/O | 96 |
| Memory Type | EEPROM |
| Propagation Delay | 5.8 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 8 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
LC4128ZE-7UMN132C Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.There is a 132-VFBGA package containing it.It is equipped with 96I/O ports.It is programmed that device terminations will be 132 .There is a BOTTOMterminal position on the electrical part in question.The device is powered by a voltage of 1.8V volts.There is a part included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.The temperature at which it operates is set to 0°C~90°C TJin order to ensure its reliability.It is mounted in the way of Surface Mount.The ispMACH? 4000ZEseries FPGA is one of these types.Chips are programmed with 132 pins.If you use this device, you will also find [0].LC4128contains its related parts.It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.In this case, EEPROMwill be used to store the data.The electronic component is mounted by Surface Mount.132pins are included in its design.A voltage of 1.9V is the maximum supply voltage for this device.In order for it to operate, a supply voltage of 1.7Vis required.This can be achieved at a frequency of 178.57MHz.Input signals are detected using 4dedicated inputs.Basic building blocks have 8logic elements.
LC4128ZE-7UMN132C Features
132-VFBGA package
96 I/Os
The operating temperature of 0°C~90°C TJ
132 pin count
132 pins
LC4128ZE-7UMN132C Applications
There are a lot of Lattice Semiconductor Corporation LC4128ZE-7UMN132C CPLDs applications.
- Page register
- High speed graphics processing
- I/O expansion
- Synchronous or asynchronous mode
- I2C BUS INTERFACE
- PULSE WIDTH MODULATION (PWM)
- TIMERS/COUNTERS
- Power Meter SMPS
- Cross-Matrix Switch
- Wide Vin Industrial low power SMPS
