LC4256B-10T100I
| Parameters | |
|---|---|
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Logic Elements/Cells | 16 |
| Number of Programmable I/O | 680 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
LC4256B-10T100I Overview
There are 256 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is contained in package [0].There are 64 I/Os programmed in it.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.There is 2.5V voltage supply for this device.It is a part of the family [0].The chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Surface Mountshould be used for mounting the chip.This type of FPGA is a part of the ispMACH? 4000B series.It has 100pins programmed.This device also displays [0].The LC4256shows its related parts.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].In this case, Surface Mountis used to mount the electronic component.There are 100 pins on the device.It operates at a maximum supply voltage of 2.7V volts.The device is designed to operate with a minimal supply voltage of 2.3VV.There are 680 programmable I/Os in this system.You can achieve 125MHzfrequencies.The status of input signals is detected by 10dedicated inputs.An elementary building block consists of 16logic elements/cells.
LC4256B-10T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4256B-10T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4256B-10T100I CPLDs applications.
- Software Configuration of Add-In Boards
- USB Bus
- INTERRUPT SYSTEM
- Programmable power management
- Wide Vin Industrial low power SMPS
- Bootloaders for FPGAs
- POWER-SAVING MODES
- Software-driven hardware configuration
- Interface bridging
- PLC analog input modules
