LC4256B-10TN100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Logic Elements/Cells | 16 |
| Number of Programmable I/O | 680 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4256B-10TN100I Overview
256 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is embedded in the 100-LQFP package.There are 64 I/Os on the board.It is programmed that device terminations will be 100 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.There is 2.5V voltage supply for this device.It belongs to the family [0].It is recommended to package the chip by Tray.The temperature at which it operates is set to -40°C~105°C TJin order to ensure its reliability.The chip should be mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000B series.It has 100pins programmed.It is also characterized by YES.You can find its related parts in the [0].High efficiency requires a voltage supply of [0].It is recommended to store data in [0].The electronic component is mounted by Surface Mount.The pins are [0].With a maximum supply voltage of [0], it operates.With a minimal supply voltage of [0], it operates.Currently, there are 680 Programmable I/Os available.In this case, 125MHzis the frequency that can be achieved.Input signals are detected using 10dedicated inputs.In order to form a fundamental building block, there are 16logic elements/cells.
LC4256B-10TN100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4256B-10TN100I Applications
There are a lot of Lattice Semiconductor Corporation LC4256B-10TN100I CPLDs applications.
- POWER-SAVING MODES
- Digital multiplexers
- DDC INTERFACE
- Custom shift registers
- Discrete logic functions
- Cross-Matrix Switch
- Random logic replacement
- USB Bus
- Protection relays
- Power automation
