LC4256B-75T100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 52 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256B-75T100I Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The product is contained in a 100-LQFP package.The device is programmed with 64 I/O ports.100terminations are programmed into the device.There is a QUADterminal position on the electrical part in question.The power supply voltage is 2.5V.It is included in Programmable Logic Devices.Trayis the packaging method.The operating temperature of the machine is -40°C~105°C TJ to ensure its reliability.Surface Mountshould be used for mounting the chip.It belongs to the ispMACH? 4000Bseries of FPGAs.With 100pins programmed, the chip is ready to use.It is also possible to find YESwhen using this device.You can find its related parts in the [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data is stored using [0].In this case, it is mounted by Surface Mount.There are 100pins on it.It operates with the maximal supply voltage of 2.7V.The device is designed to operate with a minimal supply voltage of 2.3VV.16logic blocks/elements are present.There are a total of 52 Programmable I/Os.There should be a lower maximum frequency than 322MHz.The input signals are detected by 10dedicated inputs.
LC4256B-75T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4256B-75T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4256B-75T100I CPLDs applications.
- Multiple DIP Switch Replacement
- Voltage level translation
- Reset swapping
- DDC INTERFACE
- ON-CHIP OSCILLATOR CIRCUIT
- Pattern recognition
- ROM patching
- Wide Vin Industrial low power SMPS
- Bootloaders for FPGAs
- Cross-Matrix Switch
