LC4256B-75TN100C
| Parameters | |
|---|---|
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 52 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
LC4256B-75TN100C Overview
The mobile phone network has 256 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The item is packaged with 100-LQFP.The device has 64inputs and outputs.100terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered from a supply voltage of 2.5V.It is included in Programmable Logic Devices.It is recommended to package the chip by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that Surface Mountholds the chip in place.As part of the ispMACH? 4000Bseries, it is a type of FPGA.With 100pins programmed, the chip is ready to use.Additionally, this device is capable of displaying [0].Its related parts can be found in the [0].Optimal efficiency requires a supply voltage of [0].It is recommended that data be stored in [0].It is mounted by Surface Mount.The device is designed with pins [0].This device operates at a voltage of 2.7V when the maximum supply voltage is applied.With a minimal supply voltage of [0], it operates.There are 52 programmable I/Os in this system.There should be a lower maximum frequency than 322MHz.It has 10dedicated inputs for detecting input signals.Fundamental building blocks consist of 16logic elements/cells.
LC4256B-75TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4256B-75TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4256B-75TN100C CPLDs applications.
- Power Meter SMPS
- State machine control
- Protection relays
- Wide Vin Industrial low power SMPS
- STANDARD SERIAL INTERFACE UART
- Preset swapping
- Random logic replacement
- ON-CHIP OSCILLATOR CIRCUIT
- POWER-SAVING MODES
- Reset swapping
