LC4256B-75TN176C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LC4256 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 52 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4256B-75TN176C Overview
The mobile phone network has 256 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).176-LQFPis the package in which it resides.The device is programmed with 128 I/Os.It is programmed to terminate devices at [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 2.5Vprovides power to the device.It is included in Programmable Logic Devices.The chip should be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].It is mounted in the way of Surface Mount.This type of FPGA is a part of the ispMACH? 4000B series.There are 176pins on the chip.It is also possible to find YESwhen using this device.The LC4256indicates that related parts can be found.High efficiency requires a voltage supply of [0].It is recommended to store data in [0].This electronic part is mounted in the way of Surface Mount.There are 176 pins embedded in the device.There is a maximum supply voltage of 2.7V.A minimum supply voltage of 2.3V is required for it to operate.There are a total of 16 logic elements or blocks.There are 52 Programmable I/Os.There is a maximum frequency of 178.57MHz.Input signals are detected by 4dedicated inputs.Fundamental building blocks consist of 36logic elements/cells.
LC4256B-75TN176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4256B-75TN176C Applications
There are a lot of Lattice Semiconductor Corporation LC4256B-75TN176C CPLDs applications.
- DDC INTERFACE
- Programmable power management
- Preset swapping
- PULSE WIDTH MODULATION (PWM)
- Configurable Addressing of I/O Boards
- Storage Cards and Storage Racks
- Protection relays
- I2C BUS INTERFACE
- STANDARD SERIAL INTERFACE UART
- Address decoders
