LC4256C-10T100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 322MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 10ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256C-10T100I Overview
256 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.There is a 100-LQFP package containing it.As a result, it has 64 I/O ports programmed.The device is programmed with 100 terminations.This electrical component has a terminal position of 0.There is 1.8V voltage supply for this device.There is a part in the family [0].Trayshould be used for packaging the chip.To ensure its reliability, the operating temperature is set to [0].Ideally, the chip should be mounted by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000C series.With 100pins programmed, the chip is ready to use.When using this device, YESis also available.The LC4256can be used to identify its related parts.The supply voltage should be maintained at 1.8V for high efficiency.In this case, EEPROMwill be used to store the data.In this case, it is mounted by Surface Mount.100pins are included in its design.A maximum voltage of 1.95Vis required for operation.In order for it to operate, a supply voltage of 1.65Vis required.It is recommended that the maximum frequency be less than 322MHz.The input signals are detected by 10dedicated inputs.A fundamental building block of logic consists of 16logic elements/cells.
LC4256C-10T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4256C-10T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4256C-10T100I CPLDs applications.
- Code converters
- Software Configuration of Add-In Boards
- Multiple Clock Source Selection
- Page register
- ON-CHIP OSCILLATOR CIRCUIT
- Software-Driven Hardware Configuration
- INTERRUPT SYSTEM
- LED Lighting systems
- Digital designs
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
